NGH
How do I use the photolithography machine and when? 15 hints left

Hint 1

There are two times you need to use this machine: when you're trying to fix the small coil --

Hint 2

-- and when you're trying to get into Niko's study.

Hint 3

The process is the same for both items, though the coil repair requires an extra step. Let's start with that one.

Hint 4

After Ryan tells you what the small coil needs, come to the photo lab and click on the computer under the cabinet to make the circuit board.

Hint 5

Once you have the board design, the next step is to insert it into the actual photolithography machine, which is the thing at the right. Read to the end of this hint for the complete process.

Hint 6

You can also find most of the info you need in the book on top of the machine. Read the third and fourth pages for the complete rundown.

Hint 7

First, you need to pour in a bottle of the correct etching acid for the type of wafer you're using. The wafers are kept in the cabinet in here, and the key to the cabinet is in Ellie's desk drawer.

Hint 8

The wafers are silicon. If you picked up the "Solutions" notebook from the left table in the main lab --

Hint 9

-- you have the formula to be used for silicon wafers. Go to the chemical area in the main lab to make that chemical.

Hint 10

Okay, now you really are ready to go. Following the diagram in the book, add the etching chemical to the funnel at left.

Hint 11

This makes a tray pop open; put the circuit design in the tray.

Hint 12

This makes a second tray pop open; put the silicon wafer in there. Now push the red button, and the process starts. It takes 12 hours, so you can go do other things and come back the next day or night (or later) to pick up your finished circuit.

Hint 13

When you come back, you'll find the wafer tray popped open; take the wafer, and there's your completed object. Ta-dah!

Hint 14

The second time you use this machine, the process is exactly the same, except you won't be using the computer to make a circuit board. That is --

Hint 15

-- make a second bottle of etching acid at the chemical station and pour it in the funnel, insert the design, get a second silicon wafer from the cabinet and insert it, press the red button, and come back in 12 hours.

Guide help

This is the low-spoiler guide for "How do I use the photolithography machine and when?" puzzle in Nancy Drew: The Deadly Device. Unlike in normal walkthrough, you get gradual hints on how to solve the puzzle. Click the big button below to see your first hint. If the hint contains a spoiler, you will be warned about it before clicking.

Progress

Hints written by Lynn S. HendricksBuy me a coffee
Latest articles